Electrocauter SURTRON 400 HP LED

Description

The Surtron 400 HP LED can be used to simultaneously perform monopolar and bipolar surgery in application fields which require high precision and reliability.

UNDERWATER CUTTING AND COAGULATION

DOUBLE ACTIVITY OPERATION

• Two output channels for monopolar cutting;
  
• Two independent setting and output channels for monopolar coagulation more frequently.
  

CONTROLLED CUTTING PROCEDURES

• Cutting currents for eschar free incision;
  
• Cutting current with selectable coagulating property for bleeding controlled dissection;
  
• Low capacitive coupling by current endoscopic procedures Slow BLEND.
  

DOUBLE PROCEDURES SUBSIDIARIES COAGULATION

• SPEEDY Coag, Coag DEEP and two operators;
  
• SPRAY COAG achievable with handpiece or pedal.
  

WIDE BIPOLAR FEATURES

• Bipolar cutting with bleeding control;
  
• Cutting current Slow BLEND;
  
• Start and Stop automatic activated separately.
  

TOTAL SAFETY FOR PATIENT AND SURGEON

• Acceptability of contact impedance between the patient’s body and the neutral plate constantly verified by the electronic control Skin Plate Electronic Control called SPEC;
  
• Continuous monitoring of leakage current;
  
• Change in automatically compensated mains voltage before starting the RF power output.

CUSTOM PROCEDURES

• Independent choice of coagulation currents and power levels of each of the two operators;
• Ten configurable personal procedures and immediately recallable.
  

CONDUCT OF EXTENSIONS AND SIGNAL CONNECTION

• Outputs for connections driven argon plasma units and smoke aspirator.
  

AUTOMATIC SELF-DIAGNOSIS WITH SURTRON 300 HP

• Automatic diagnostic control of the actual complete electronic drive functionality and accessories connected and coded report of found failures.
  

FEATURES

• Max output power monopolar pure CUT: 400 W – 300 Ω;
  
• Max output power monopolar cut-coag CUT80%: 300 W – 300 Ω;
  
• Max output power monopolar cut-coag CUT60%: 250 W – 300 Ω;
  
• Max output power monopolar cut-coag CUT40%: 200 W – 300 Ω;
  
• Max output power monopolar cut ENHANCED: 250 W – 500 Ω;
  
• Max output power monopolar cut-coag BLEND: 250 W – 300 Ω;
  
• Max output power monopolar coag SPEEDY: 120 W – 500 Ω;
  
• Max output power monopolar coag DEEP: 120 W – 200 Ω;
  
• Max output power monopolar coag SPRAY: 120 W – 2000 Ω;
  
• Max output power monopolar coag SPRAY ARGON: 120 W – 2000 Ω;
  
• Max output power bipolar CUT: 120 W – 50 Ω;
  
• Max output power bipolar cut-coag CUT80%: 120 W – 50 Ω;
  
• Max output power bipolar cut-coag CUT60%: 120 W – 50 Ω;
  
• Max output power bipolar cut-coag CUT40%: 100 W – 50 Ω;
  
• Max output power bipolar cut-coag BLEND: 120 W – 150 Ω;
  
• Max output power bipolar coag COAG: 120 W – 50 Ω;
  
• Vessel sealing: 200 W – 50 Ω;
  
• Working frequency Monopolar / Bipolar: 425 kHz / 525 kHz;
  
• Patient circuit: F;
  
• Selectable input voltage: 115 – 230 Vac;
  
• Mains frequency: 50 – 60 Hz;
  
• Electrical input power: 1000 VA;
  
• Size WxHxD: 470x150x400 mm;
  
• Weight: 17,5 Kgs.

CONTROLS

• Patient/Plate circuit monitoring;
  
• Output power monitoring;
  
• Self check control;
  
• H.F. Leakage currents control;
  
• Compensation of mains fluctuation.